Soyuz TMA Manned Transport Spacecraft

Tnx to Energia for this useful info

The modified Soyuz TMA manned transport spacecraft has been developed on the basis of a Soyuz TM spacecraft in accordance with intergovernmental agreements between Russia and the USA and is an integral part of the Orbital Station Complex. The main purpose of the manned transport spacecraft is to provide rescue of the main crew of the station and delivery of special visiting crews.
During the flight the spacecraft fulfills the following tasks:

delivery of a visiting crew consisting of up to three persons and small accompanying cargoes (research equipment, personal affairs of cosmonauts, repair equipment for the station, etc.);
constant availability of the spacecraft, attached to the station during its manned flight, in the standby mode to be ready for emergency descent of the main crew onto the ground in case of hazardous situation on the station, cosmonaut illness or injury, etc. (assured crew return vehicle function);
planned descent of the visiting crew onto the ground; the composition of the spacecraft crew during delivery and return may be changed on the station;
returning to the ground, together with the crew, payloads of relatively low mass and volume (results of crew work on the station, personal affairs, etc.);
disposal of wastes from the station in the living compartment to be burned down in the atmosphere during descent.

Modified Vehicle Soyuz TMA Overall View	Modified Vehicle Soyuz TMA Layout

The Soyuz TMA manned transport spacecraft is a modification of Soyuz TM spacecraft distinguished for a high reliability and safety of flight for the crew which is proven by all the launches of the spacecraft implemented in the period of years 1986 -2002 for the purposes of servicing orbital stations.
The basic modifications of the Soyuz TM spacecraft are connected with implementation of requirements for enlargement of crew anthropometric parameter range up to the values acceptable for the American astronaut contingent, and with increase of crew protection level from shock loads by decreasing landing speeds and improving shock-absorption of its chairs.
To denote the modification of this spacecraft in design and general technical documentation, the name "Soyuz TMA" (anthropometric) was adopted.

For implementation of the above requirements on the baseline Soyuz TM spacecraft the following basic modifications in layout, design and onboard systems of the descent module (DM) were made without increase of its dimensions:

Three newly developed long Kazbek-UM amortization chairs with new four-mode dampers that provide chair adjustment, depending on the astronaut mass.
A re-arrangement of equipment was made in the areas above and below DM chairs which allows one to accommodate longer chairs and astronauts with increased anthropometry and to enlarge the passage area through the access hatch. In particular, a new control panel decreased in height, a new cooling-drying assembly, data storage system and other new or modified systems are installed.
On the DM primary structure in the area of right and left chair footrests the cavities were stamped about 30mm deep that allowed big cosmonauts and their long chairs to be accommodated. Correspondingly, the primary structure and the routing of pipes and cables were changed.
A minimum of modification was made to elements of DM primary structure, instrument frame and brackets. The crew cabin was "cleared" as far as possible from projecting elements - one moved them to more convenient places, remade a valves unit of the spacesuit oxygen supply system.
Modifications of a landing equipment set were made.

two (of 6 single-mode) soft landing engines (SLE) were replaced with two new three-mode engines (SLE-M);
for reduction of measurement errors the Kaktus-1V gamma-altimeter was replaced with a new Kaktus-2V instrument.

In addition to the above changes, separate systems and assemblies were modified on the Soyuz TMA spacecraft. The modifications are mainly connected with transfer to new components and introduction of design improvements.

Anthropometric parameters of Soyuz TM and Soyuz TMA spacecraft

Parameters	Soyuz TM	Soyuz TMA
1. Cosmonaut (astronaut) height, cm maximum, in the standing position minimum, in the standing position maximum, in the sitting position	182 164 94	190 150 99
2. Cosmonaut (astronaut) chest circumference, cm maximum minimum	112 96	not limited not limited
3. Cosmonaut (astronaut) mass, kg maximum minimum	85 56	95 50
4. Maximum foot length, cm	-	29,5

Soyuz TMA descent module layout
with indication of modified elements


Pages mainteinded by Claudio Ariotti, IK1SLD		Credits